PF31011 - Lean Completions Not Triggering Correct Issue Quantities On Phantom BOM Component Items
(Doc ID 2948743.1)
Last updated on MAY 12, 2023
Applies to:
JD Edwards EnterpriseOne Shop Floor Control - Version 9.2 and laterInformation in this document applies to any platform.
Symptoms
When an item has a phantom on the BOM, the Lean Completion PF31011 triggers the LM transaction for the components under the phantom. However, the BOM quantity for the phantom components are not being used for the LM quantity. This Resulting in the Wrong Issued Quantity of the Phantom Components.
Steps:
- P3002 - Setup a BOM Parent Item with a Phantom at (level 1) with qty of 22
- P3002 - Setup the Phantom with two simple components below the phantom (Qty .65 and .15)
- Run Lean PF31011 for the Parent Item
- Notice that the LM is not calculated Correctly for the Component (It's not taking the Phantom Quantity into consideration.)
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Cause |
Solution |
References |