My Oracle Support Banner

Exalogic Infrastructure - ExaPatch Guide (Doc ID 1568441.1)

Last updated on JULY 25, 2018

Applies to:

Oracle Exalogic Elastic Cloud Software - Version 2.0.0.0.0 to 2.0.4.0.4
Linux x86-64
Oracle Solaris on x86-64 (64-bit)

Purpose

This document describes how to install, configure, and use ExaPatch, a utility that simplifies the process of patching and upgrading the Exalogic infrastructure (BIOS,ILOM, firmware, and software) for the Exalogic Infrastructure PSU Physical Release Upgrade.

Scope

 

Important Note:

The steps provided in this document should be applied as part of a whole Exalogic system PSU upgrade as they are supplemental to the full documentation and do not contain full instructions to set up the environment.

To learn more about PSUs and start the process, please go to the Exalogic Patch Set Updates (PSU) Master Note [ID 1314535.1].

Exalogic Infrastructure content in a PSU has been tested to work together in an optimal manner, and needs to be patched as a single unit. Applying only parts of the Infrastructure patches and choosing not to apply others is not supported. Oracle highly recommends customers to align with the infrastructure SW/FW versions included in a PSU.

 For more information about installing, configuring, and using ExaPatch, see the ExaPatch User's Guide, which is included in the ExaPatch bundle at exapatch/doc/E41279_01.pdf (e.g 17201685/Infrastructure/2.0.3.0.4/exapatch-1.1.1_bnnnn.tgz). For the default values of ExaPatch options, see the "ExaPatch Command Syntax and Options" in the ExaPatch User's Guide

Details

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Purpose
Scope
Details
 Preparing to use ExaPatch
 Installing ExaPatch
 Preparing the Runtime Environment
 Creating the Rack Configuration File
 Creating the Rack Configuration File by Using a Template
 Verifying the Rack Components in the Rack Configuration File
 Validating the Password Directives in the Rack Configuration File
 Checking the Version Number of Each Component
 Patching and Upgrading the Exalogic Infrastructure Using ExaPatch
 Patching the InfiniBand Switches
 Patching the NM2-GW Switches
 Patching the NM2-36p Switch
 Patching Compute Nodes  ILOM
 Patching Compute Nodes (Physical)
References

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.