Known Issues for Exalogic 2.0.6.2.X Patch Set Updates
(Doc ID 2156050.1)
Last updated on APRIL 15, 2024
Applies to:
Exalogic Elastic Cloud X3-2 HardwareOracle Exalogic Elastic Cloud Software - Version 2.0.6.2.160419 to 2.0.6.2.170418
Oracle Solaris on x86-64 (64-bit)
Linux x86-64
Oracle Virtual Server (x86-64)
Purpose
This document lists the critical known issues for Exalogic 2.0.6.2.X Patch Set Updates.
Details
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Purpose |
| Details |
| Exalogic PSU Known Issues |
| April 2017 PSU - Generic Known Issues |
| In the generic Exapatch prePatchCheck validation across rack, prechecks for Switch fails when upgrade path is from 2.1.x to 2.2.4-3 |
| verify-topology fails: Switch is not configured with an ib node description |
| Post PSU Upgrade ILOM SHOWS "WARNING: HTTPS CERTIFICATE IS SET TO FACTORY DEFAULT" |
| Exalogic April 2017 Virtual PSU (2.0.6.2.170418): Compute Nodes Lose IB Networks When NM2-GW IB Switch Unexpectedly Reboots or Becomes Unavailable |
| April 2017 PSU - Virtual Linux Issues |
| Custom certificates provisioned for EMOC are replaced with self-signed certificate following an upgrade to Apr 2017 PSU |
| Following an upgrade to April 2017 PSU (Virtual), dual mounts are observed for the Exalogic Pool mount |
| Following the April 2017 PSU upgrade, OL6 guest vServers are unable to communicate over the IPoIB-default network |
| iaas-describe-vservers does not print all IP addresses assigned to April 2017 PSU vServers |
| Exalogic Virtual Guest Vservers In EMOC Shown As Suspended State During/After Upgrading To April 2017 PSU |
| Exalogic Virtual: Patching Of Control Servers Fails During April 2017 PSU Upgrade With "ERROR: EMOC version files are NOT updated" Error |
| Exalogic Virtual: EC-templates Patching Fails During Patching to PSUs Later than April 2017 Due To EMOC Control vServer Panic and Crash |
| January 2017 PSU - Virtual Known Issues |
| Unable to Start Guest vServers From EMOC BUI In Exalogic January 2017 PSU 2.0.6.2.170117 Virtual Rack |
| October 2016 PSU - Generic Known Issues |
| When http authentication is enabled, the prePatchCheck command throws a warning message if HTTP URI is not passed explicitly |
| ExaBR - UNABLE TO SUCCESSFULLY PARSE XML INPUT OCCURS WHILE RESTORING ILOM |
| ZFS IB HCA Firmware Upgrading Issue with patching script |
| October 2016 PSU - Physical Linux Issues |
| ExaBr failed to take a backup of 2.0.0.0.0 |
| October 2016 PSU - Virtual Linux Issues |
| Post NM-2 switch upgrade in a virtual environment, vServer creation may fail |
| cnode-vserver-control.py script hangs if the compute node has PromptPassword set in rack_configuration.py |
| Exalogic July 2016 PSU Exapatch Version 1.4.7 Pre-patch Check for Exalogic Control Services Fails Regardless of the Availability of Recent ExaBR Backups |
| EC Control Service upgrade failed with ERROR pre-patch RecentBackupCheck failed even after patch 24352770 applied. |
| Error messages seen in OEL6 vServer upgrade logs while removing the older kernel-devel rpms |
| Exalogic : vServers Stuck In Single User Mode When Applying PSU In Parallel On Multiple vServers |
| Exalogic: Exapatch Precheck Fails When ZFSSA URI Contains '$' Character During Patching vServer |
| July 2016 PSU - Generic Known Issues |
| Upgrading NM2 Switch Firmware on full rack Exalogic systems or multi-rack Exa systems causing Network outage |
| PrePatchCheck for Infiniband Switch failed cause of insufficient system memory on IB switches. |
| ZFS Head prePatchCheck fails with following message (either for one of the heads or both the heads) |
| ZFS patching fails due to losing IO access to the pool. |
| ZFS Software Patching failed with problem "id1,sd@SATA_____TOSHIBA_THNSNC51________XXXXXXXXXXX/a' in pool 'exalogic' failed to open" |
| July 2016 PSU - Physical Linux Issues |
| ExaBr failed to take a backup of 2.0.0.0.0 |
| July 2016 PSU - Physical Linux Issues |
| Post Patching Switches, NFS mount point is in hung state (Refer: Bug18465204) |
| Upgrade from EECS 2.0.4.0.4 and earlier releases (containing NM2 FW v2.0.x) to EECS 2.0.4.0.5 and newer releases (containing NM2 FW v2.1.x) requires downtime to perform the switch FW upgrade |
| July 2016 PSU - Virtual Linux Issues |
| Post upgrading the Exalogic Control Services, the EMOC BUI could be down |
| cnode-vserver-control.py script hangs if the compute node has PromptPassword set in rack_configuration.py |
| Exalogic July 2016 PSU Exapatch Version 1.4.7 Pre-patch Check for Exalogic Control Services Fails Regardless of the Availability of Recent ExaBR Backups |
| Patching of Exalogic Control Services fails while applying the Jul 2016 PSU |
| Exalogic : vServers Stuck In Single User Mode When Applying PSU In Parallel On Multiple vServers |
| GENERIC KNOWN ISSUES APPLICABLE TO ALL 2.0.6.2.X PSU's |
| Exalogic Virtual: Exalogic Control Services (ecservices) Upgrade Failing With "patch_el_echo_falcon_pc.tgz: Cannot open: No such file or directory" Error (Doc ID 2557187.1) |
| Exalogic: "smpartition start" Command Throws "Unable to get rpc version on some nodes in the fabric" Error During Post PSU Upgrade Configuration For NM2-GW Switches |
| Exalogic Compute Node Upgrade Fails With "CheckHWnFWProfile: Unable To Load Functions Library" Errors When Running Exapatch |
| Exalogic Virtual: EoIB Network Bonds Do Not Work On OL6 Guest vServers When SM Master Failover Happens On the IB Switches |
| Exalogic Virtual: ecservices Upgrade Failing With "patch_el_echo_falcon_post.sh: No such file or directory" Error In Exapatch Logs |
| Exalogic Virtual: vServers Crashed Due To PSU Version In vServers Higher Than Exalogic Infrastructure PSU Version |
| Exalogic Virtual: Ecservices Upgrade Failing With "failed to run cd /opt/egbt_upgrade/OVMM/OVMM; sh" Error |
| Exalogic: prePatchChecks On Compute Nodes Failing With "/dev/console: Input/output error" In Exapatch Logs |
| Exalogic Virtual: Exapatch prePatchCheck For Guest vServers Fails With "No update paths found" Error |
| Exalogic Virtual: EC Services (Exalogic Control Services) Upgrade Failing With "ERROR: OVMM version files are NOT updated" Error |
| Exalogic: Exapatch prePatchChecks On Infiniband Gateway (NM2-GW) Failing With "ERROR: Insufficient free space on /var/log" Error |
| Exalogic Virtual: Guest vServer Upgrade Failing With "FAILED - Installing Uptrack RPMs" Errors In Exapatch Logs |
| Known Issues for Older Exalogic PSU Versions |
| Modification History |
| Documentation Accessibility |
| References |