Installation Known Issues for Exalogic 2.0.6.4.0 Release
(Doc ID 2360627.1)
Last updated on APRIL 17, 2023
Applies to:
Oracle Exalogic Elastic Cloud Software - Version 2.0.6.4.0 to 2.0.6.4.0Linux x86-64
Oracle Virtual Server (x86-64)
Purpose
This document lists known issues for the Exalogic 2.0.6.4.0 Release
Scope
Details
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Purpose |
| Scope |
| Details |
| Oracle OVS/OVMM 3.4.4 Known issues |
| Imaging of dom0 via PXE server stuck during boot loading |
| ECU step 40 failed |
| ECU step 48 failed |
| MTU settings for Infiniband links within Control VMs are not at recommended values |
| After reimaging CHECKHWPROFILE fails with no disk controller error |
| Exalogic Virtual 2.0.6.4.0: Dom0 OVS Compute Nodes Hanging When Running "sosreport" Command |
| OSWATCHER logs in dom0 filled with "IFCONFIG IS OBSOLETE" related messages |
| Networking questions during reimage are not seen in ILOM serial console |
| In vDC attaching multiple vDisk volumes in a single operation to a vServer fails |
| PDUV2 cannot be discovered due to SSLHANDSHAKE error |
| Issues seen while editing ECU config file using Open Office Version 4.1.4 |
| No monitoring data available for guest vServers with OS monitoring enabled |
| Unique constraint (EMOC.USER_ROLES_ASSOC_PK) violated during Storage Discovery |
| EMOC: Ghost vServer entries for non-existent vServers are observed in the Assets accordion |
| ECU STEP 44: Fails due to ping failure to PC2 over ETH-ADMIN network |
| Intermittent issue: vServer creation fails |
| vServer creation may take 14 - 16 mins to complete if multiple parallel create jobs are initiated in EMOC |
| Exalogic Virtual 2.0.6.4.0: OL7 Guest vServers EoIB Network Does Not Work After Reboot |
| Exalogic Virtual 2.0.6.4.0: Large Number of IPChange Notifications When Guest Has NIC Aliases |
| Exalogic Virtual 2.0.6.4.X: Poolfs ExalogicPool1 NFS Share (/nfsmnt/*) Disappearing/Not Getting Mounted On Dom0 Compute Nodes |
| Exalogic Compute Nodes Hang on Exalogic Virtual 2.0.6.4.0 |
| Oracle Linux (OL7) on Exalogic Physical Known Issues |
| Storage connection lost when trying to reimage node using power cycle option |
| Hardware clock Timezone not set to the UTC |
| NTP not Synchronized |
| /var/log/messages with 'Failed to resume link' message, 'eth0: link is not ready','failed to assign' |
| /var/log/messages with 'Device ibX does not seem to be present, delaying initialization' |
| hmp-interconnect service state is inactive (failed) after fresh install |
| hmp-ipmi.service failed and associated messages in /var/log/messages after fresh install |
| Ksplice updates prefetch error seen during bootup in a freshly imaged Exalogic OL7 node |
| EOIB not Working Post Reboot of OL7 Based Exalogic Compute Node |
| Time Zone of Guest vServers is Hard-Coded to PST |
| Exalogic: EoIB vNIC Is Not Enslaved By The Bond Upon Re-creation In OL7/UEK4 On Exalogic Physical |
| References |