My Oracle Support Banner

[The removal meter read must be for the specified Meter Configuration] Error Encountered When Creating SP Meter Event Via ServicePointMeterEvent_DTO On CCB (Doc ID 1602509.1)

Last updated on FEBRUARY 28, 2019

Applies to:

Oracle Utilities Customer Care and Billing - Version 2.2.0.0.0 and later
Information in this document applies to any platform.

Symptoms

An error is encountered when creating a SP Meter Event record using the ServicePointMeterEvent_DTO. The error indicates that the Meter Configuration of the input Meter Read is not the same as the Meter Configuration of it's SP Meter History parent record. During further investigation, it was found that the COBOL program CIPMSMER needs to check if the input Meter Read record has same Meter Configuration Id as the SP Meter Installation History record.

ERROR

The removal meter read must be for the specified Meter Configuration.
The read taken at the time the meter was removed must be for the same meter configuration specified for this installation.

To correct this error, either:
Pick meter read for the specified meter configuration; or
Add a new meter read.



The issue can be reproduced at will with the following steps:

1.Create a Removal Meter Read using the SP Meter History Meter Configuration.
2.Update the SP Meter History with the Removal Meter Read above.
3.Create a Removal SP Meter History Event using the removal meter read id as the Meter Read Id.
4.Run the code online.

Changes

 

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
Changes
Cause
Solution
References

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.