Single Circuit And Overview Schematics Are Including Intra Feeder Ties (Doc ID 2276818.1)

Last updated on JUNE 14, 2017

Applies to:

Oracle Utilities Network Management System - Version 2.3.0.0.0 and later
Information in this document applies to any platform.

Symptoms

On : 2.3.0.0.0 version, Model Management

Single circuit and overview schematics are including intra feeder ties

Both Single circuit and overview schematics are including intra feeder tie switches even though both schematics are configured to NOT include them. The intra feeder tie switches that are being included in the drawings are all connected to a cross phase zero_imp cable and I'm guessing schematics is chocking on these. The cross phase zero_imp cables are there so that when the switch is operated it can re-energize for example an A phase line from a B phase line. Other intra feeder tie switches seem to be excluded from the schematic maps as they should be.


The issue can be reproduced at will with the following steps:

1. Search to device 109433179
2. Bring up single circuit schematics and overview schematics and notice the device is included in the drawings and shouldn't be

Changes

 

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms