My Oracle Support Banner

HALRT-02006: Flash disk predictive failure (Doc ID 1113033.1)

Last updated on JANUARY 21, 2020

Applies to:

Oracle Exadata Storage Server Software - Version 11.2.1.3.1 to 11.2.3.2.0 [Release 11.2]
Information in this document applies to any platform.

Symptoms

Sun Oracle Exadata Storage Server is equipped with four PCIe cards. Each card has four flash disks (FDOMs) for a total of 16 flash disks. The 4 PCIe cards are present on PCI slot numbers 1, 2, 4, and 5. The PCIe cards are not hot-pluggable such that Exadata Cell must be powered down before replacing the flash disks or cards.

You may need to replace a flash disk because the flash disk is in predictive failure status.

To identify a predictive failure flash disk, use the following command:



An alert will be generated when a flash disk is in predictive failure.

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
 Here is a sample output on a V2 or X2 cell:
 Here is a sample output on a X3 cell:
Cause
Solution
 If Active Image Version is 11.2.3.2.0 or higher:
 CellCLI> ALTER CELL SHUTDOWN SERVICES ALL
 CellCLI> ALTER CELL SHUTDOWN SERVICES ALL
 CellCLI> LIST GRIDDISK ATTRIBUTES NAME, ASMMODESTATUS
 If Active Image Version is lower than 11.2.3.2.0:
 
 
 References:

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.