ODA : Deploying oda_base in VM Installation IP Address of Eth1 Gets Overwritten with the Same IP Address as Eth0 (Doc ID 2013605.1)

Last updated on JULY 03, 2015

Applies to:

Oracle Database Appliance Software - Version 12.1.2.2 to 12.1.2.2 [Release 12.1]
Oracle Database Appliance X5-2 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

During the deployment of ODA_BASE in  a virtualized ODA with 12.1.2.2 image,  IP address of  Eth1 overwritten with the same Ip Address as Eth0  in the SetupNetwork step.

The ODAVP deployment configures both eth0 and eth1 with the same public ip address although different ip addresses were specified for eth0 and eth1 interface.

 

 

e.g.

ipconfig output will be like :


 eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
  link/ether 00:16:3e:7e:20:15 brd ff:ff:ff:ff:ff:ff
  inet 172.28.220.64/24 brd 172.28.220.255 scope global eth0    <<<----- IP address
  inet6 fe80::216:3eff:fe7e:2015/64 scope link
     valid_lft forever preferred_lft forever

 

 eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
  link/ether 00:16:3e:75:51:98 brd ff:ff:ff:ff:ff:ff
  inet 172.28.220.64/24 brd 172.28.220.255 scope global eth1   <<<----same as eth0
  inet6 fe80::216:3eff:fe75:5198/64 scope link
     valid_lft forever preferred_lft forever

 

Changes

 No change. It's fresh VM installation on 11.2.1.2.2.

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms