bdacheckib on BDA V4.3-V4.5 Raises "iblinkinfo: invalid option -- 'R'"
(Doc ID 2190814.1)
Last updated on AUGUST 03, 2021
Applies to:
Big Data Appliance X4-2 Hardware - Version All Versions and laterBig Data Appliance Integrated Software - Version 4.3.0 to 4.5.0 [Release 4.3 to 4.5]
Linux x86-64
Symptoms
NOTE: In the examples that follow, user details, cluster names, hostnames, directory paths, filenames, etc. represent a fictitious sample (and are used to provide an illustrative example only). Any similarity to actual persons, or entities, living or dead, is purely coincidental and not intended in any manner.
On BDA V4.3-BDA V4.5 running bdacheckib raises the following:
bdacheckib:
iblinkinfo: invalid option -- 'R'
Usage: iblinkinfo [options]
Options:
--node-name-map node name map file
--switch, -S <port_guid> start partial scan at the port specified by
<port_guid> (hex format)
--port-guid, -G <port_guid> (same as -S)
--Direct, -D <dr_path> start partial scan at the port specified by <dr_path>
--all, -a print all nodes found in a partial fabric scan
--hops, -n Number of hops to include away from specified node
--down, -d print only down links
--line, -l (line mode) print all information for each link
on a single line
--additional, -p print additional port settings (PktLifeTime,
HoqLife, VLStallCount)
--load-cache filename of ibnetdiscover cache to load
--diff filename of ibnetdiscover cache to diff
--diffcheck <key(s)> specify checks to execute for --diff
--filterdownports filename of ibnetdiscover cache to filter downports
--outstanding_smps, -o specify the number of outstanding SMP's
which should be issued during the scan
--switches-only Output only switches
--cas-only Output only CAs
--config, -z use config file, default: /etc/infiniband-diags/ibdiag.conf
--Ca, -C Ca name to use
--Port, -P Ca port number to use
--timeout, -t timeout in ms
--sm_port, -s SM port lid
--m_key, -y M_Key to use in request
--errors, -e show send and receive errors
--verbose, -v increase verbosity level
--help, -h help message
--version, -V show version
bdacheckib0: json ib link input < 3 els
iblinkinfo: invalid option -- 'R'
Usage: iblinkinfo [options]
Options:
--node-name-map node name map file
--switch, -S <port_guid> start partial scan at the port specified by
<port_guid> (hex format)
--port-guid, -G <port_guid> (same as -S)
--Direct, -D <dr_path> start partial scan at the port specified by <dr_path>
--all, -a print all nodes found in a partial fabric scan
--hops, -n Number of hops to include away from specified node
--down, -d print only down links
--line, -l (line mode) print all information for each link
on a single line
--additional, -p print additional port settings (PktLifeTime,
HoqLife, VLStallCount)
--load-cache filename of ibnetdiscover cache to load
--diff filename of ibnetdiscover cache to diff
--diffcheck <key(s)> specify checks to execute for --diff
--filterdownports filename of ibnetdiscover cache to filter downports
--outstanding_smps, -o specify the number of outstanding SMP's
which should be issued during the scan
--switches-only Output only switches
--cas-only Output only CAs
--config, -z use config file, default: /etc/infiniband-diags/ibdiag.conf
--Ca, -C Ca name to use
--Port, -P Ca port number to use
--timeout, -t timeout in ms
--sm_port, -s SM port lid
--m_key, -y M_Key to use in request
--errors, -e show send and receive errors
--verbose, -v increase verbosity level
--help, -h help message
--version, -V show version
bdacheckib0: json ib link input < 3 els
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Cause |
| Solution |