Exadata Patching: Node Is Not Coming Up After Post Patching Reboot Fails with error: file `/initramfs-4.1.12-124.30.1.el7uek.x86_64.img' not found.
(Doc ID 2630398.1)
Last updated on SEPTEMBER 22, 2021
Applies to:
Oracle Exadata Storage Server Software - Version 19.1.0.0.0 to 19.3.4.0.0 [Release 12.2]Information in this document applies to any platform.
Symptoms
During the Exadata Image upgrade to 19.x.x.x after the YUM update Exadata Server is in the boot loop and doesn't start . It fails with the following error:
file `/initramfs-4.1.12-124.30.1.el7uek.x86_64.img' not found.
Press any key to continue...
Press any key to continue...
Press any key to continue...
Press any key to continue...
..
..
This is the stack we see before it restart again.
[ 5.416762] evm: HMAC attrs: 0x1^M
[ 5.418685] rtc_cmos 00:04: setting system clock to 2020-01-17 13:37:53 UTC (1579268273)^M
[ 5.511202] usb 1-1: new high-speed USB device number 2 using ehci-pci^M
[ 5.557585] md: Waiting for all devices to be available before autodetect^M
[ 5.564666] md: If you don't use raid, use raid=noautodetect^M
[ 5.570902] md: Autodetecting RAID arrays.^M
[ 5.575286] md: Scanned 0 and added 0 devices.^M
[ 5.580019] md: autorun ...^M
[ 5.583098] md: ... autorun DONE.^M
[ 5.586721] List of all partitions:^M
[ 5.590495] No filesystem could mount root, tried: ^M
[ 5.595763] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)^M
[ 5.604513] CPU: 29 PID: 1 Comm: swapper/0 Not tainted 4.1.12-124.30.1.el7uek.x86_64 #2^M
[ 5.610204] usb 2-1: new high-speed USB device number 2 using ehci-pci^M
[ 5.619817] Hardware name: Oracle Corporation SUN SERVER X4-2 /ASSY,MB,X4-2, 1U , BIOS 25070100 08/15/2018^M
[ 5.628504] usb 1-1: New USB device found, idVendor=8087, idProduct=0024^M
[ 5.628506] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0^M
[ 5.628815] hub 1-1:1.0: USB hub found^M
[ 5.628878] hub 1-1:1.0: 6 ports detected^M
[ 5.658694] 0000000000000086 00000000c3ba96bc ffff887e4cf13d28 ffffffff8174ff04^M
[ 5.666939] ffffffff81a22468 ffffea01f923c640 ffff887e4cf13da8 ffffffff8174abd5^M
[ 5.675179] ffff887e00000010 ffff887e4cf13db8 ffff887e4cf13d58 00000000c3ba96bc^M
[ 5.683424] Call Trace:^M
[ 5.686158] [] dump_stack+0x63/0x81^M
[ 5.691667] [] panic+0xda/0x22a^M
[ 5.696733] [] mount_block_root+0x29a/0x2a9^M
[ 5.702847] [] mount_root+0x54/0x58^M
[ 5.708266] [] prepare_namespace+0x13d/0x176^M
[ 5.714473] [] kernel_init_freeable+0x216/0x242^M
[ 5.720934] [] ? initcall_blacklist+0xb6/0xb6^M
[ 5.727235] [] ? __schedule+0x23e/0x850^M
[ 5.727512] usb 2-1: New USB device found, idVendor=8087, idProduct=0024^M
[ 5.727513] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0^M
[ 5.727821] hub 2-1:1.0: USB hub found^M
[ 5.727887] hub 2-1:1.0: 8 ports detected^M
[ 5.755766] [] ? __schedule+0x24a/0x850^M
[ 5.761548] [] ? rest_init+0x80/0x80^M
[ 5.767058] [] kernel_init+0xe/0xf0^M
[ 5.772484] [] ret_from_fork+0x61/0x90^M
[ 5.778161] [] ? rest_init+0x80/0x80^M
[ 5.783726] Kernel Offset: disabled^M
[ 5.790896] Rebooting in 60 seconds..^M
[ 65.798218] ACPI MEMORY or I/O RESET_REG.^M
[ 5.418685] rtc_cmos 00:04: setting system clock to 2020-01-17 13:37:53 UTC (1579268273)^M
[ 5.511202] usb 1-1: new high-speed USB device number 2 using ehci-pci^M
[ 5.557585] md: Waiting for all devices to be available before autodetect^M
[ 5.564666] md: If you don't use raid, use raid=noautodetect^M
[ 5.570902] md: Autodetecting RAID arrays.^M
[ 5.575286] md: Scanned 0 and added 0 devices.^M
[ 5.580019] md: autorun ...^M
[ 5.583098] md: ... autorun DONE.^M
[ 5.586721] List of all partitions:^M
[ 5.590495] No filesystem could mount root, tried: ^M
[ 5.595763] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)^M
[ 5.604513] CPU: 29 PID: 1 Comm: swapper/0 Not tainted 4.1.12-124.30.1.el7uek.x86_64 #2^M
[ 5.610204] usb 2-1: new high-speed USB device number 2 using ehci-pci^M
[ 5.619817] Hardware name: Oracle Corporation SUN SERVER X4-2 /ASSY,MB,X4-2, 1U , BIOS 25070100 08/15/2018^M
[ 5.628504] usb 1-1: New USB device found, idVendor=8087, idProduct=0024^M
[ 5.628506] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0^M
[ 5.628815] hub 1-1:1.0: USB hub found^M
[ 5.628878] hub 1-1:1.0: 6 ports detected^M
[ 5.658694] 0000000000000086 00000000c3ba96bc ffff887e4cf13d28 ffffffff8174ff04^M
[ 5.666939] ffffffff81a22468 ffffea01f923c640 ffff887e4cf13da8 ffffffff8174abd5^M
[ 5.675179] ffff887e00000010 ffff887e4cf13db8 ffff887e4cf13d58 00000000c3ba96bc^M
[ 5.683424] Call Trace:^M
[ 5.686158] [] dump_stack+0x63/0x81^M
[ 5.691667] [] panic+0xda/0x22a^M
[ 5.696733] [] mount_block_root+0x29a/0x2a9^M
[ 5.702847] [] mount_root+0x54/0x58^M
[ 5.708266] [] prepare_namespace+0x13d/0x176^M
[ 5.714473] [] kernel_init_freeable+0x216/0x242^M
[ 5.720934] [] ? initcall_blacklist+0xb6/0xb6^M
[ 5.727235] [] ? __schedule+0x23e/0x850^M
[ 5.727512] usb 2-1: New USB device found, idVendor=8087, idProduct=0024^M
[ 5.727513] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0^M
[ 5.727821] hub 2-1:1.0: USB hub found^M
[ 5.727887] hub 2-1:1.0: 8 ports detected^M
[ 5.755766] [] ? __schedule+0x24a/0x850^M
[ 5.761548] [] ? rest_init+0x80/0x80^M
[ 5.767058] [] kernel_init+0xe/0xf0^M
[ 5.772484] [] ret_from_fork+0x61/0x90^M
[ 5.778161] [] ? rest_init+0x80/0x80^M
[ 5.783726] Kernel Offset: disabled^M
[ 5.790896] Rebooting in 60 seconds..^M
[ 65.798218] ACPI MEMORY or I/O RESET_REG.^M
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Cause |
Solution |
References |