Reset iLO (LO100) network configuration using ipmitool after motherboard replacement (Doc ID 855421.1)

Last updated on JULY 31, 2009

Applies to:

Oracle Exadata Storage Server Software - Version: 11.1.0.3.0 to 11.1.0.3.1
Linux x86-64
Correct version of the product is 11.1.3.1.0 through 11.1.3.2.1

Goal

This document provides the steps required to configure the network interface of the iLO (LO100) card after replacing the motherboard or the iLO card itself.

After replacing the system motherboard or the iLO (LO100) card on an Exadata Storage Server (ProLiant DL180 G5), the iLO network interface is not available using the host name registered in DNS:

# ping cell01-ilo
PING cell01-ilo (10.220.49.45) 56(84) bytes of data.
From 10.220.49.74 icmp_seq=2 Destination Host Unreachable

The network configuration for the ILO is different to the one recorded on DNS or /etc/host files.


Solution

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms