Volume Calculated Incorrectly by OTM Order Configuration (Doc ID 1391347.1)

Symptoms

On OTM version 6.2.3

ACTUAL BEHAVIOR
---------------
Order Configuration is incorrectly calculating volumes.

EXPECTED BEHAVIOR
-----------------------
Expect Volumes to be correctly calculated.

STEPS
-----------------------
The issue can be reproduced at will with the following steps:

BRIEF:

1 - Log onto OTM

2 - Navigate to an Order Release that was created where OTM calculated the volumes.

3 - Go to the Ship Unit tab, note the volumes.

4 - Compare to the THU values and find the OTM calcualted values are incorrect, fro example:

Gross Volume Per Ship Unit is expected to be calculated as: Length 80 CM X Width 60 CM x Height 83 CM = 398400 or 0.39 CUMTR.
However the Gross Volume Per Ship Unit is shown in the UI as 0.53 CUMTR, this is incorrect.

Details:

1 - Log onto OTM

2 - Navigate to: Order Management > Power Data > Order Configuration > Order Configurations.

3 - Click NEW and create the following:

ID: Enter As Needed.
Order Base / Release Creation: Ship Unit.

Order Base tab:
Net Weight: Never
Net Volume: Never
Total Package Count: Never
Packaging Unit Count: Only If Null
Total Weight: Never
Total Volume: Never
Total Package Count: Never
Packaging Unit Count: Only If Null
Allow Over Releasing: Unticked
Single Release PerInstruction: Unticked.
PlanFrom/To Type: OVERRIDE SOURCE/DEST
Buffering Supported: Unticked.

Order Release tab:
Ship Unit Calculation: Calculate Ship Unit Metrics from Ship Unit Line
Gross Weight: Always / Net Weight Per Ship Unit + Tare of THU.
Gross Volume: Always / Calculate Using Ship Unit Dimensions.
Net Weight: Always / Sum Net Weight from Lines / Count
Net Volume: Always / Sum Net Volume from Lines / Count.
Total Gross Weight: Always / Gross Weight Per Ship Unit x Count.
Total Gross Volume: Always / Gross Volume Per Ship Unit x Count.

The Ship Unit Line fields are each set to 'Always'.

4 - Create Order Release as follows:

ID: Enter As Needed
Order Configuration: As created above.
Ship Unit tab, clicked New Ship Unit and create the following:

Transport Handling Unit: 3810
THU 3810 compromises of:
Unit type: Both
In/On/Max: In
Tare Weight: 33.00KG
Effective Volume: 0.4 CU M
Length per Ship Unit: 0.8 M
Width per Ship Unit: 0.6 M
Height per Ship Unit: 0.83 M
Stackable Above and Stackable Below: ticked.
Transport Handling Unit Count: 32

5 - Click New Line Item, added Item number to 376.

6 - Save and Finished.

7 - Click EDIT.

8 - Click to the Ship Uni tab, it shows:

Total Gross Volume: 17.00 CUMTR
Gross Volume Per Ship Unit: 0.53 CUMTR

9 - Gross Volume Per Ship Unit is expected to be calculated as: 80 CM X 60 CM x 83 CM = 398400 or 0.39 CUMTR.

Therefore the Gross Volume Per Ship Unit shown in the UI of 0.53 CUMTR is
incorrect. This also causes the Total Gross Volume to be incorrect.

Cause

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.