My Oracle Support Banner

Inventory Standard Datafix Instruction #7: Onhand Quantity Corrupted on Lot Information (Doc ID 1538728.1)

Last updated on SEPTEMBER 14, 2018

Applies to:

Oracle Inventory Management - Version 11.5.10.2 and later
Information in this document applies to any platform.
MTL_ONHAND_QUANTITIES_DETAIL, LOT_NUMBER, NULL, NOT NULL, LOT CONTROL

Goal

 

This document provides the detailed instructions for fixing wrong data caused by onhand corruption on lot information. This note covers two scenarios:

Scenario 1 - When the Item is not lot controlled and the onhand quantity shows Lot Number populated.

Scenario 2 - When the Item is lot controlled but the onhand quantity does not show any Lot Number associated.

 

Also this document will show all the available information regarding the Root Cause of this data corruption.


Please follow up this document in the following order:
A. Identification Scripts: This will confirm if you are having this data corruption.
B. Verifying your file versions: This will allow you and support to confirm if you are already in a known fixed version.
C. Root Cause Analysis. It shows all the relevant information about this issue Root Cause.
D. Datafix Instructions. It will provide steps for fixing the data corruption.

 

Solution

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Goal
Solution
 A. Identification Scripts.
 Symptoms
 Scenario 1 - Item is not lot controlled but Lot Number Populated into onhand information 
 Scenario 2 - Item is lot controlled but Lot Number is missing from onhand information
 B. Verifying your file versions.
 Scenario 1 - Item is not lot controlled but Lot Number Populated into onhand information
 Scenario 2 - Item is lot controlled but Lot Number is missing from onhand information
 C. Root Cause Analysis.  
 Scenario 1 - Item is not lot controlled but Lot Number Populated into onhand information
 Scenario 2 - Item is lot controlled but Lot Number is missing from onhand information
 Scenario 3 - Item controls changed as receiving quantity
 D. Datafix Instructions.  
 Scenario 1 - Item is not lot controlled but Lot Number Populated into onhand information
 1. Backup Data.
 2. Obtaining the parameter values for step 3.
 3. Execute the datafix.
 4. Check the results
 Scenario 2 - Item is lot controlled but Lot Number is missing from onhand information
 1. Backup Data.
 2. Obtaining parameters values for step 3.
 3. Execute the following Datafix
 4. Check the results.
References

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.