[PCA 2.4.4.4] Upgrade Guide
(Doc ID 3047453.1)
Last updated on OCTOBER 15, 2024
Applies to:
Private Cloud Appliance - Version 2.4.4 and laterLinux x86-64
Purpose
This KM describes the main steps of upgrading to PCA 2.4.4.4 release.
Details
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Purpose |
| Details |
| i. Prerequisites |
| ii. Document Reference |
| iii. Firmware Level |
| iv. Order of operations |
| 1. Install latest version of pca_upgrader |
| 2. Upgrade Management Nodes |
| 3. Upgrade Firmware on Management Nodes |
| 3.1 Disable ILOM Device Monitoring |
| 3.2 Upgrade ILOM Firmware |
| 3.3 Upgrade CX5 Card Firmware |
| 3.4 Upgrade RAID Controller Firmware |
| 3.5 Enable ILOM Device Monitoring |
| 3.6 Reboot active Management Node |
| 4. Upgrade Firmware on Internal ZFSSA |
| 4.1 Upgrade ovcasn02r1 |
| 4.2 Upgrade ovcasn01r1 |
| 4.3 Post Upgrade |
| 5. Upgrade Firmware on Cisco Switches to 10.3(4a)M |
| 5.1 Upgrade switches Cisco 9.3(8) to 10.2(5)M |
| 5.1.1. Upgrade primary leaf switch Cisco 9.3(8) to 10.2(5)M |
| 5.1.2. Upgrade secondary leaf switch Cisco 9.3(8) to 10.2(5)M |
| 5.1.3. Upgrade primary spine switch Cisco 9.3(8) to 10.2(5)M |
| 5.1.4. Upgrade secondary spine switch Cisco 9.3(8) to 10.2(5)M |
| 5.1.5. Upgrade management switch Cisco 9.3(8) to 10.2(5)M |
| 5.2 Upgrade Cisco switches 10.2(5)M to 10.3(4a)M |
| 5.2.1. Upgrade primary leaf switch Cisco 10.2(5)M to 10.3(4a)M |
| 5.2.2. Upgrade secondary leaf switch Cisco 10.2(5)M to 10.3(4a)M |
| 5.2.3. Upgrade primary spine switch Cisco 10.2(5)M to 10.3(4a)M |
| 5.2.4. Upgrade secondary spine switch Cisco 10.2(5)M to 10.3(4a)M |
| 5.2.5. Upgrade management switch Cisco 10.2(5)M to 10.3(4a)M |
| 6. Upgrade Firmware on Compute Nodes |
| 6.1 X8-2 Compute Nodes |
| 6.2 X9-2 Compute Nodes |
| 6.2.1 Upgrade ILOM Firmware |
| 6.2.2 Upgrade CX5 Card Firmware |
| 7. Upgrade Compute Node with pca-admin |
| References |