My Oracle Support Banner

Procedure to Manually Collect System Controller (SC) Level Failure Data on Sun Fire[TM] v1280, E2900, 3800, 4800, E4900, 6800, E6900, Netra 1280 and 1290 Servers. (Doc ID 1003529.1)

Last updated on DECEMBER 07, 2018

Applies to:

Sun Fire E2900 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Fire V1280 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Netra 1290 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Fire 3800 Server - Version All Versions and later
Sun Fire 4800 Server - Version All Versions and later
All Platforms

Goal

This document provides a procedure to collect Sun Fire[TM] Midrange Server System Controller (SC) Data when it is not possible to capture scextended or 1280extended Explorer data.

Manual SC command output, as documented in this article, is important from a troubleshooting perspective to have available, but is only a subset of commands which would be collected by Explorer, the preferred data set for this server family.  Please collect extended Explorer if able to do so utilizing Document 1019066.1 as a guide.

If you are unable to execute Explorer for some reason, please use the following information to make sure to collect the most useful command data.

Click on the type of server you need information on and you will skip to the specific instructions for that server:

Solution

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.