My Oracle Support Banner

Sun Fire [TM] 12K/15K: Cards Fail to be Configured in I/O Board Slot 1 if Slot 3 is Populated (Doc ID 1003585.1)

Last updated on FEBRUARY 06, 2019

Applies to:

Sun Fire 12K Server - Version Not Applicable and later
Sun Fire 15K Server - Version Not Applicable and later
All Platforms

Symptoms

Adding a Crystal-2A card (2GB/Sec PCI Dual FC Network Adapter) into a domain's configuration using cfgadm results in errors, and then a domain panic.

#  cfgadm -c configure pcisch0:e09b1slot1
- error message - "Hardware specific error"


Then the /var/adm/messages or the domain console show a panic:

WARNING: pcisch-0: PCI fault log start:
PCI excessive retry error
PCI error ocurred on device #6
pcisch-0: PBM AFSR=0x20800003.20000000 dwordmask=0 bytemask=3
pcisch-0: PCI primary error (8):
Excessive Retries
pcisch-0: PCI secondary error (8):
Excessive Retries
pcisch-0: PBM AFAR 0.00124040:WARNING: [AFT1] Bus Error (BERR) Event
detected by CPU291
Privileged Data Access at TL=0, errID 0x000001d0.41c71c38
AFSR 0x00100800.00000000 AFAR 0x00000451.00124000
Fault_PC 0x10372f4
...
 ^Mpanic[cpu291]/thread=2a1004d7d40: [AFT1] errID 0x000001d0.41c71c38 BERR
Error(s)

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.