My Oracle Support Banner

Sun Fire [TM] SF4800/SF6800 - E4900/E6900 - V1280/E2900 Servers: UltraSPARC[R] IV System Board Requirements (Doc ID 1006342.1)

Last updated on JULY 18, 2019

Applies to:

Sun Fire 4800 Server - Version Not Applicable and later
Sun Fire E4900 Server - Version Not Applicable and later
Sun Fire E6900 Server - Version Not Applicable and later
Sun Fire V1280 Server - Version Not Applicable and later
Sun Fire 6800 Server - Version Not Applicable and later
All Platforms



Sun Fire v1280, E2900, 4800, E4900, 6800, and E6900 UltraSPARC(R) IV (US-IV) System Board Requirements

There are four USIV CPU module speeds available:

The minimum requirements in this document pertain to all the boards, regardless of their CPU speed. The purpose of this document is to combine all of the individual component resources into one quick reference guide. This reference guide will provide information on what requirements must be met prior to installing any USIV board into a Sun Fire[TM] Midrange System.

NOTE:  Requirements for the Sun Fire[TM] Midrange System product line and UltraSPARC(R) IV (USIV) System Boards are available on a component by component basis from the Sun System Handbook. To determine what is required for an upgrade or configuration change, you may refer to each of the individual component pages in the Sun System Handbook to get all of the information necessary to prepare for the upgrade process - or refer to this article.

It is important to note the following with regards to USIV and Sun Fire Midrange Systems:

See <Document:1009212.1> for Sun Fire[TM] 12K/15K/E20K/E25K (HighEnd Systems) requirements.
See <Document:1007858.1> for UltraSPARC IV+ CPU configuration guidelines.


To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.