Sun Fire[TM] Mid-Range Servers ScApp Features and Requirements Matrix
Last updated on JUNE 06, 2017
Applies to:Sun Netra 1290 Server - Version Not Applicable and later
Sun Netra 1280 Server - Version Not Applicable and later
Sun Fire 3800 Server - Version Not Applicable and later
Sun Fire E4900 Server - Version Not Applicable and later
Sun Fire E6900 Server - Version Not Applicable and later
This document provides an overview of the Sun Fire[TM]1280/E2900/3800/48x0/E4900/6800 & Sun Fire[TM] E6900 & Netra[TM]1280/1290 server's System Controller Application (ScApp) firmware version features & requirements.
Before upgrading ScApp, always read the Release Notes, Install.info file, and README file that are included with each version of the ScApp firmware patch. The firmware revisions listed below are considered the minimum major and minor level needed to provide stable operation for the listed servers and features. Running firmware levels earlier than those listed below puts the system vulnerable to bugs which have been fixed, will reduce the availability features engineered into newer firmware, and may cause unnecessary instability. If a system is operating on a firmware level below those listed in this document, it should be considered for upgrade as soon as scheduling permits.
For maximum availability and stability, engineering suggests domains operate Solaris 10 and System Controllers operate ScApp 5.20.X.
ScApp 5.21.x was released to support USBRDT-5240 boards which have been obsoleted. As a result, ScApp 5.21.x has been obsoleted by 5.20.11 (patch 114527-12). Please upgrade your ScApp firmware as soon as possible to keep current. See <Document 1006281.1> to download and install the most current version of ScApp.
Sign In with your My Oracle Support account
Don't have a My Oracle Support account? Click to get started
My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms