My Oracle Support Banner

Sun Fire V210/V240/Netra 240 Server: System Hangs After Completing POST (Doc ID 1017586.1)

Last updated on MAY 24, 2017

Applies to:

Sun Netra 240 (DC) Server - Version Not Applicable and later
Sun Fire V210 Server - Version Not Applicable and later
Sun Fire V240 Server - Version Not Applicable and later
All Platforms

Symptoms

The Sun Fire[TM] V240 system passes POST diagnostic but then hangs:
Keyswitch set to diagnostic position.

(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240

Clearing TLBs
Power-On Reset
Executing Power On SelfTest
0>@(#) Sun Fire[TM] V210/V240,Netra[TM] 240 POST 4.11.4 2003/07/23 11:42
/export/common-source/firmware_re/post/post-build-4.11.4/Fiesta/enxs/inte
grated  (firmware_re)
0>Hard Powerup RST thru SW
0>CPUs present in system: 0 1
0>OBP->POST Call with %o0=00000000.01002000.
0>Diag level set to MIN.
0>MFG scrpt mode set to NONE
0>I/O port set to TTYA.
0>
0>Start selftest...
.
.
. text removed for brevity
.
CPU 0 Bank 0 base          0 size 1024 MB
CPU 1 Bank 0 base 1000000000 size 1024 MB
Probing /pci@1d,700000 Device 2  network network
Probing /pci@1f,700000 Device 2  network network
Probing /pci@1e,600000 Device 6  pmu i2c gpio
Probing /pci@1e,600000 Device a  usb
Probing /pci@1e,600000 Device d  ide disk cdrom
Probing /pci@1e,600000 Device 2  Nothing there
Probing /pci@1e,600000 Device 3  Nothing there
Probing /pci@1c,600000 Device 2  scsi disk tape scsi disk tape
Probing /pci@1c,600000 Device 1  Nothing there
Probing /pci@1d,700000 Device 1  Nothing there   prompt, but
communication with ALOM is possible and all indications from the
"showenvironment" command are normal.

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.