Sun StorageTek[TM] 6140, 6540, and Flexline 380 Array Controller 7-Segment LED (Doc ID 1021109.1)

Last updated on JULY 18, 2016

Applies to:

Sun Storage Flexline 380 Array - Version Not Applicable and later
Sun Storage 6140 Array - Version Not Applicable and later
Sun Storage 6780 Array - Version Not Applicable and later
All Platforms

Goal

The purpose of this document is to describe how the seven(7) segment display on the RAID controller module works, for a Sun StorageTek[TM] 6540, StorageTek[TM] Flexline 380, and Sun StorageTek[TM] 6140. Additionally, it will describe the codes that can be displayed.
The seven segment displays on these arrays are static. Under optimal conditions they will display the tray ID, which is 85 by default. 

On boot, the array controllers will go through a rapid sequence of displays, which indicate the points in the boot cycle that the controllers are performing.  This document is intended to describe the static display, which does not change after the boot sequence has stopped. The static display indicates the reason why the boot sequence is stopped, and will be accompanied by an Amber Fault LED next to the display that indicates that the controller is offline as well. 

Solution

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms