Sun Blade X6270 - BSOD while trying to load MDT 2010 with 10 Gbe network drivers on Windows (2008 R2)
(Doc ID 1386892.1)
Last updated on JUNE 03, 2022
Applies to:
Sun Blade X6270 M2 Server Module - Version Not Applicable to Not Applicable [Release N/A]Information in this document applies to any platform.
Symptoms
BSOD while trying to load MDT 2010 with 10 Gbe network drivers on Windows (2008 R2).
Customer needs to load MDT 2010.When the WinPE 3.0 image loads they get a BSOD error message
If they remove the 10 Gbe network drivers from the image they don't get a BSOD .
Occasionally the WinPE OS will boot correctly, maybe 1 in every 6 attempts.
Once the OS has been loaded we don't seem to have any issues.
PC check and VTS were run on the Blade and the issue was not noticed.
If you attemp to build the blade server via MDT 2010 and you received the Windows "0x00000124" Stop error message.
This occurs when the MDT (Microsoft Deployment Toolkit) attempts to load the 10g Ethernet drivers.
The HW information of NEM is as below
This affects WinPE 3.0/3.1 which currently uses Intel drivers (v16.6)
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Cause |
Solution |