My Oracle Support Banner

Sun Fire [TM] V1280/E2900, Netra 1280/1290 ( LW8/Amazon/Everglades ): net1 Onboard Interface fails on boot net1 and test net1 of interface (Doc ID 1456194.1)

Last updated on MARCH 31, 2021

Applies to:

Sun Netra 1280 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Netra 1290 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Fire E2900 Server - Version Not Applicable to Not Applicable [Release N/A]
Sun Fire V1280 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.
The EIS recommendation is to set local-mac-address? true
This fix is counter to EIS recommendations.

Symptoms



To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - SPARC Legacy Servers



The systems is showing errors against net1 Onboard Interface.

{0} ok test net1
Register tests: passed
Internal loopback test: Internal loopback packet RX failed
Exiting further tests
ERROR:  Selftest failed. Return code = -1

{0} ok boot net1
/ssm@0,0/pci@18,700000/network@3: 1000 Mbps full duplex link up
TL = 1, TT = 34. ERROR: Alignment Error
TSTATE= 0x1401 [ccr = 0x0, asi = 0x0, pstate = 0x14, cwp = 0x1]
TPC= 00000000f0038348
TNPC= 00000000f003834c
TICK= 8000002b32862ebc, TICKCMP = ffffffffffffffff  

Attempting either of these commands using the full path (instead of the net1 alias) also fail the same way

Changes

 OBP perameters have been set to EIS recommendations

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document
Symptoms
Changes
Cause
Solution


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.