Erroneous Upper and Lower Non-critical voltage errors in SEL or system event log (Doc ID 1519845.1)

Last updated on JUNE 13, 2016

Applies to:

Sun Fire X4600 Server - Version Not Applicable and later
Sun Fire X4200 Server - Version Not Applicable and later
Sun Fire X4100 M2 Server - Version Not Applicable and later
Sun Fire X4200 M2 Server - Version Not Applicable and later
Sun Fire X4100 Server - Version Not Applicable and later
Information in this document applies to any platform.

Symptoms

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Sun x86 Systems

You may observe the following when you power on the system when the service processor (SP) is already up and running.

The front panel amber PS fault LED may turn may turn on for 2-3 seconds and then LED will turn off.

The system will continue to boot and is running the OS fine, however you check and see the following messages in the SEL and/or event list around the time of power on:

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms