Sun Storage 7000 Unified Storage System: When SNMP community is changed, traps still show 'public' as the community
(Doc ID 1525946.1)
Last updated on OCTOBER 01, 2021
Applies to:
Sun Storage 7210 Unified Storage System - Version All Versions and laterSun Storage 7310 Unified Storage System - Version All Versions and later
Sun Storage 7410 Unified Storage System - Version All Versions and later
Sun ZFS Storage 7120 - Version All Versions and later
Sun ZFS Storage 7320 - Version All Versions and later
7000 Appliance OS (Fishworks)
Symptoms
After changing the SNMP service configuration to a community other than "public", examining SNMP packets will still show the community set as public.
This does not affect the functionality of the service, systems that wish to read SNMP traps from an appliance will still need to specify the correct community if it has been changed from public.
However examining the SNMP trap packet itself, using tcpdump, wireshark, snoop, etc., will show the community still set as public.
e.g.
The SNMP configuration is changed such that the community is set to some other value than public:
There is a response when using the correct "someothervalue" community.
Changes
The SNMP configuration has been changed so that the community is set to some other value than "public".
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |