Pillar Axiom: Storage System Axiom General Configuration Issues
(Doc ID 1588767.1)
Last updated on JANUARY 06, 2022
Applies to:
Pillar Axiom 600 Storage System - Version All Versions and laterInformation in this document applies to any platform.
If a VMWare ESX 3.x host detects a queue full condition, it may abort the SCSI commands. VMWare ESX/ESXi 4.0 and higher will display a device busy error.
Symptoms
If QFULL conditions exist, the ESX VMkernel log may contain entries similar to:
- In ESX 3.x
- status = 40/0 0x## 0x## 0x##
- In ESX/ESXi 4.0 and later:
- H:0x0 D:0x28 P:0x0 Valid sense data: 0x## 0x## 0x##
- H:0x0 D:0x08 P:0x0 Valid sense data: 0x## 0x## 0x##
The hexadecimal 28 or decimal 40 in the error is the SCSI status code for the queue full state. The value 0x08 in the above error is the SCSI Status code indicating a device busy state.
Changes
None.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Changes |
Cause |
Solution |
References |