ODA Disk Issue: Suggested Common Disk Diagnostic Commands or Scripts with Tips, Best Practice and Examples
(Doc ID 1596826.1)
Last updated on OCTOBER 01, 2018
Applies to:Oracle Database Appliance - Version All Versions to All Versions [Release All Releases]
Oracle Database Appliance Software - Version 184.108.40.206 to 220.127.116.11 [Release 2.1 to 12.1]
Oracle Database Appliance X4-2 - Version All Versions to All Versions [Release All Releases]
Oracle Database Appliance X3-2 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
To assist with commands that can be used for debugging ODA disk issues
- Intended to help differentiate between various usage and problem scenarios.
Please use the following note for required Disk Diagnostic information
MINIMUM DISK REPLACEMENT DIAGNOSTICS
If Oakd is running on both nodes:
- oakcli show env_hw
- /root/Extras/odasundiag.sh < DiskDiag
- oakcli stordiag e#_pd_S# < where e# is enclosure 0 or 1 and S# is Slot number *
If more than one disk
- oakcli manage diagcollect --storage
For any PROBLEM disk whether identified by the above outputs or from errors found in trace files or the ASM alert.logs:
oakcli stordiag outputs
If you are using X3-2 or X4-2 or higher then upload e< 0|1 >_pd_<slot#>
Example for ODA X3-2, X4-2 or X5-2
To view full details, sign in with your My Oracle Support account.
Don't have a My Oracle Support account? Click to get started!
In this Document
|Disk Commands for Trouble Shooting|
|fw and disk|
|JBOD / Storage Shelf|