Disk under LSI Hardware Raid (HWRaid) shows as N/A instead of a target number (Doc ID 1603789.1)

Last updated on MAY 01, 2017

Applies to:

Sun SPARC Enterprise T5140 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V245 Server - Version All Versions to All Versions [Release All Releases]
Sun SPARC Enterprise T5240 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V215 Server - Version All Versions to All Versions [Release All Releases]
Sun Netra T5220 Server - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

A failed disk has been reported in a hardware raid volume, but there is no target number listed

- Solaris (raidctl)

raidctl -l <volume>

Example:

Volume			Size	Stripe	Status	 Cache	RAID
	Sub			Size			Level
		Disk					
----------------------------------------------------------------
c1t0d0			279.3G	N/A	DEGRADED OFF	RAID1
		0.1.0	279.3G		GOOD	
		N/A	279.3G		FAILED	<------ disk status: failed, disk target: not available


- <strong>OBP (fcode)</strong>

Select &lt;scsi controller&gt;

Example:

- ok select scsi:

{0} ok select /pci@0/pci@0/pci@2/scsi@0

- ok show-volumes
  Volume 1 Target 0 Type IM (Integrated Mirroring)
  Degraded Enabled     
  2 Members                585805824 Blocks, 299 GB
  Disk 2
  Primary Online
  Target 1 HITACHI H103030SCSUN300GA2A8
  Disk 3
  Secondary Missing Out Of Sync <------------ disk status: missing, out of sync
  Target ff                     <------------ disk target: ff, not available
  
 

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms