Sun SPARC Enterprise(R) M3000/M4000 - reset-all is canceled due to no available SCF path
(Doc ID 1607609.1)
Last updated on JANUARY 10, 2022
Applies to:
Sun SPARC Enterprise M3000 Server - Version All Versions to All Versions [Release All Releases]Sun SPARC Enterprise M4000 Server - Version All Versions to All Versions [Release All Releases]
All Platforms
The behavior described in this document has been seen on M3000 and M4000. It was observed after a scheduled maintenance reboot as well as after panic reboots.
This document applies only if the XSCF 'showstatus' command indicates there are "No failures found."
Symptoms
The domain fails to boot indicating "no available path." This may occur after a reboot (e.g., following an XCP upgrade).
Likewise, reset-all fails with the error indication that "reset-all is canceled due to no available SCF path."
See the below example:
The firmware level is within supported range.
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |