Sun ZFS Storage Appliance: Cannot access Service Processor ILOM through Service Processor net management port even though it appears to be set up correctly
(Doc ID 1629441.1)
Last updated on FEBRUARY 02, 2022
Applies to:
Sun ZFS Storage 7320 - Version All Versions and laterSun ZFS Storage 7420 - Version All Versions and later
Oracle ZFS Storage ZS3-4 - Version All Versions and later
Oracle ZFS Storage ZS3-2 - Version All Versions and later
Oracle ZFS Storage ZS4-4 - Version All Versions and later
7000 Appliance OS (Fishworks)
Symptoms
FSE connected his laptop to a ZFS appliance service processor net management port to upgrade the service processor ILOM BIOS/firmware. He could not ping the SP even though /SP/network appeared to be set up properly
Changes
On a normal array when a show /SP/network is run on the service processor from the serial console, we find the
service processor managementport parameter is set to :
managementport = /SYS/SP/NET0
On the array with the problem we see that management is connected to
managementport = /SYS/MB/NET0
This actually correlates with igb0. So, they are using igb0 for ILOM management
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Changes |
Cause |
Solution |