My Oracle Support Banner

How to boot a T5-2 from a hardware RAID Volume (Doc ID 1670532.1)

Last updated on JUNE 05, 2018

Applies to:

SPARC T5-2 - Version All Versions and later
SPARC T5-4 - Version All Versions and later
SPARC T5-8 - Version All Versions and later
SPARC T4-1 - Version All Versions and later
SPARC T4-2 - Version All Versions and later
Information in this document applies to any platform.


Once hardware RAID volumes are created, ensure that they are in an optimal state.

{0} ok show-volumes
Volume 0 Target 143 Type RAID1 (Mirroring)
  Name glue-sys WWID 0c605f5c4c5e5c4e
  Optimal Enabled Background Init In Progress
  2 Members 583983104 Blocks, 298 GB
  Disk 1
  Primary Optimal
  Target 9 HITACHI H109030SESUN300G A606 PhyNum 0
  Disk 0
  Secondary Optimal
  Target a HITACHI H109030SESUN300G A606 PhyNum 1

Then, use probe-scsi-all to obtain the volume's controller path & VolumeDeviceName:

{0} ok probe-scsi-all

FCode Version 1.00.63, MPT Version 2.00, Firmware Version

Target 143 Volume 0
  Unit 0 Disk LSI Logical Volume 3000 583983104 Blocks, 298 GB
  VolumeDeviceName 3c605f5c4c5e5c4e VolumeWWID 0c605f5c4c5e5c4e


To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.