My Oracle Support Banner

Drive capacity reported by raidctl is incorrect, iostat output is still ok. (Doc ID 1671439.1)

Last updated on NOVEMBER 30, 2017

Applies to:

Sun Fire V215 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V245 Server - Version All Versions to All Versions [Release All Releases]
Sun Fire V445 Server - Version All Versions to All Versions [Release All Releases]
Sun Netra T2000 Server - Version All Versions to All Versions [Release All Releases]
Sun SPARC Enterprise T2000 Server - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

After upgrading to mpt patch 141743-02 (included in kernel patch 141444-09) or later, or kernel patch 141444-09, the drive capacity reported by raidctl is incorrect, iostat output is still ok. The drive is labeled correctly.

 

# raidctl -l -g 0.0.0 0
Disk Vendor Product Firmware Capacity Status HSP
----------------------------------
0.0.0 FUJITSU MAY2073RCSUN72G 0401 310.9M GOOD N/A

 

# iostat -E sd0
sd0 Soft Errors: 2 Hard Errors: 0 Transport Errors: 0
Vendor: LSILOGIC Product: Logical Volume Revision: 3000 Serial No:
Size: 73.01GB <73012215808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0

 

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
Cause
Solution
References


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.