My Oracle Support Banner

Why do I get a 'arp_bringup_done: init failed err 7e' message when rebooting my system ? (Doc ID 1922329.1)

Last updated on JANUARY 03, 2018

Applies to:

Solaris Operating System - Version 11 and later
Information in this document applies to any platform.

Symptoms

The following error in /var/adm/messages is reported by the ip kernel module at reboot while plumbing up the different interfaces of a system:

Aug 30 15:55:42 sinprdt4 pcieb: [ID 586369 kern.info] PCIE-device: network@0,1, igb1
Aug 30 15:55:42 sinprdt4 mac: [ID 469746 kern.info] NOTICE: igb0 registered
Aug 30 15:55:42 sinprdt4 igb: [ID 611667 kern.info] NOTICE: igb0: igb 2.3.13
Aug 30 15:55:42 sinprdt4 pcieb: [ID 586369 kern.info] PCIE-device: network@0, igb0
Aug 30 15:55:42 sinprdt4 mac: [ID 435574 kern.info] NOTICE: usbecm2 link up, 10 Mbps, full duplex
Aug 30 15:55:43 sinprdt4 mac: [ID 469746 kern.info] NOTICE: e1000g2 registered
Aug 30 15:55:43 sinprdt4 mac: [ID 469746 kern.info] NOTICE: e1000g3 registered
Aug 30 15:55:43 sinprdt4 mac: [ID 435574 kern.info] NOTICE: igb2 link up, 1000 Mbps, full duplex
Aug 30 15:55:44 sinprdt4 mac: [ID 435574 kern.info] NOTICE: e1000g1 link up, 1000 Mbps, full duplex
Aug 30 15:55:46 sinprdt4 ip: [ID 909682 kern.notice] arp_bringup_done: init failed err 7e

 

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
Cause
Solution
References


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.