Sun Storage Common Array Manager (CAM): How to Upgrade Firmware for Sun Storage 2500, 2500-M2, 6000 Arrays, J4000 JBODs, and F5100 Flash Arrays
(Doc ID 1926022.1)
Last updated on APRIL 07, 2023
Applies to:
Sun Storage J4400 Array - Version All Versions and laterSun Storage J4200 Array - Version All Versions and later
Sun Storage 6140 Array - Version All Versions and later
Sun Storage J4500 Array - Version All Versions and later
Sun Flash F5100 Array - Version All Versions and later
Information in this document applies to any platform.
Goal
This document shows how to upgrade firmware on Sun Storage 2500, 2500-M2, 6000 Arrays, J4000 JBODs, and F5100 Flash Arrays using Sun Storage Common Array Manager (CAM) within the same top level firmware (from 06.xx to 06.xx or from 07.xx to 07.xx).
For information on upgrading firmware from 06.xx to 07.xx, please refer to the following:
- <Document 1131593.1> Procedure to Upgrade the Sun StorageTek[TM] 6540 Array, 6140 Array or FLX380 Storage Array from Firmware 06.xx to 07.xx
- <Document 1319254.1> Procedure to Upgrade the Sun StorageTek[TM] 2500 Series Array Controller Firmware from 06.xx to 07.xx
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Goal |
| Solution |
| Steps for upgrading firmware using the CAM BUI |
| Steps for upgrading firmware using SSCS, the CAM CLI |
| References |