RMLS - RML-Critical ACSLS/Library Station Server error or Library (Doc ID 1937115.1)

Last updated on APRIL 17, 2017

Applies to:

Sun StorageTek Auto Cartridge Sys Lib SW (ACSLS) - Version 7.0 to 8.4 [Release 7.0 to 8.0]
Sun StorageTek Removable Media Library Software (RMLS) Client System - Version 1.2.2 to 1.3.1 [Release 1.2 to 1.3]
Information in this document applies to any platform.

Symptoms

RMLS is not able to mount certain volumes.

RMLS system error message:
===
Message ID . . . . . . : RM90000 Severity . . . . . . . : 40
Message type . . . . . : Inquiry
Date sent . . . . . . : 01/09/14 Time sent . . . . . . : 01:11:13

Message . . . . : RML-Critical ACSLS/Library Station Server error or Library
  error. Resolve and Retry the operation or Cancel.'(C R)

RM00261 Escape 40 01/09/14 01:11:13.531211 UIS002 RMLS *STMT BRMMOUNT RMLS 0017
  From module . . . . . . . . : UTL002
  From procedure . . . . . . : UTL002
  Statement . . . . . . . . . : 20
  Message . . . . : The MNTRMLVOL command has failed due to a server error.
  Please determine the status of the server and it's resources and correct any
  problems before issuing MNTRMLVOL again.



iSeries (AS/400) joblog error message:
---
CPA4263 Sender copy 99 01/09/14 01:19:23.583420 QTAERR QSYS 0129 QTAERR QSYS 0129
  Message . . . . : Volume PS0303 not loaded or device TAPSL02 not ready. (C
  R)
  Cause . . . . . : -- The tape volume PS0303 is not loaded on device TAPSL02
  -- The device is not ready. -- A virtual volume could not be automatically
  mounted because it is already mounted in a different device. Recovery . . .
  : Do one of the following: -- Type C to cancel processing. -- Make device
  TAPSL02 ready, and type R to try the open operation again. -- Put the volume
  PS0303 on device TAPSL02, and type R to try the open operation again. -- If
  the tape device is a virtual tape device unload virtual volume PS0303 from
  the other device, mount it in virtual device TAPSL02 and type R to retry the
  operation. Possible choices for replying to message . . . . . . . . . . . .
  . . . : R -- Try the volume open operation again. C -- Cancel processing.


Error message in the library server (ACSLS) log:
----
2014-09-01 01:08:26 ACSLH[0]:
2378 N Co_ProcessResponses.C 1 1394
ACS: 0; LC/LMU error: Co_4400:st_parse_error:
Error: 1013 - Drive error: Failure caused by media error
Request: Mount
Volser: PS0303, media domain: T, media type: 2
Source: Cell 0,0,22,0,0
Destination: Drive 0,0,1,1

2014-09-01 01:08:26 MOUNT[0]:
2145 E mt_action_mo.c 1 1617
mo_lh_media_error: Maintenance required for volume PS0303.

2014-09-01 01:08:26 ACSSA[0]:
1431 N sa_demux.c 1 296
drive 0, 0, 1, 1: Library error, Media error




The library event log shows T10000C drive load errors with FSCs 5135 and 3CC6:
 
  Time : 2014-09-19T09:00:23.181
  Device Address : 1.1.-1.1.1
  User : root
  Requester : hli2
  Activity : move
  Request Id : 3644101
  Level : error
  Result Code : 3955
  Text : "Error from device Code: 605 - Drive media error"
  Parameters : Data=loaderror6415605005135
  
  
  Time : 2014-09-19T09:00:23.208
  Device Address : 1.1.-1.1.1
  User : root
  Requester : hli2
  Activity : move
  Request Id : 3644101
  Level : error
  Result Code : 3337
  Text : "Drive load failed due to media error - on failed load"
  Parameters : volumeLabel=PS0848T2 hliLsm=0
  
  
  Time : 2014-09-18T23:04:14.461
  Device Address : 1.4.2.1.2
  User : root
  Requester : hli1
  Activity : move
  Request Id : 3520001
  Level : warn
  Result Code : 3992
  Text : "Warning from device"
  Parameters : Data=rewindUnloadwarn6434000

Changes

No known change in the system

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms