If cfgadm can see the target but no luns are listed in cfgadm then issue is in storage array (Doc ID 1941120.1)

Last updated on NOVEMBER 06, 2014

Applies to:

Solaris SPARC Operating System - Version 10 10/08 U6 and later
Information in this document applies to any platform.

Symptoms

The output of "cfgadm -al -o show_FCP_dev" shows FC HBA port LUNs in failed condition.

Ap_Id                          Type         Receptacle   Occupant     Condition
c9 fc-fabric connected unconfigured unknown
c9::50060exxxxxxxxxx unavailable connected unconfigured failed
c9::50060exxxxxxxxxx unavailable connected unconfigured failed


Changes

LUN(s) mapped to FC HBA port no longer seen.

Example:

Originally,LUN 1 and 2 were seen:

Ap_Id                          Type         Receptacle   Occupant     Condition
c9 fc-fabric connected configured unknown
c9::50060exxxxxxxxxx,1 disk         connected    configured   unknown
c9::50060exxxxxxxxxx,2 disk         connected    configured   unknown

But now luns are not seen:

Ap_Id                          Type         Receptacle   Occupant     Condition
c9 fc-fabric connected unconfigured unknown
c9::50060exxxxxxxxxx unavailable connected unconfigured failed
c9::50060exxxxxxxxxx unavailable connected unconfigured failed

 

Cause

Sign In with your My Oracle Support account

Don't have a My Oracle Support account? Click to get started

My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms