"WARNING: ahci0: ahci port 1 task_file_status = 0x451" with using OHMP 2.3.1 on Solaris 10
(Doc ID 2003099.1)
Last updated on JUNE 03, 2022
Applies to:
Solaris Operating System - Version 10 8/11 U10 to 10 1/13 U11 [Release 10.0]Oracle Solaris on x86-64 (64-bit)
Symptoms
When Oracle Hardware Management Pack 2.3.1 is installed on X2270 M2, the following message is shown on console and in /var/adm/messages every 5 minutes.
Nov 26 19:54:52 <HOST> ahci: [ID 296163 kern.warning] WARNING: ahci0: ahci port 0 has task file error
Nov 26 19:54:52 <HOST> ahci: [ID 687168 kern.warning] WARNING: ahci0: ahci port 0 is trying to do error recovery
Nov 26 19:54:52 <HOST> ahci: [ID 551337 kern.warning] WARNING: ahci0:
Nov 26 19:54:52 <HOST> ahci: [ID 693748 kern.warning] WARNING: ahci0: ahci port 0 task_file_status = 0x451
Nov 26 19:54:52 <HOST> scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci108e,5352@1f,2/disk@0,0 (sd0):
Nov 26 19:54:52 <HOST> Error for Command: <undecoded cmd 0x85> Error Level: Retryable
Nov 26 19:54:52 <HOST> scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Nov 26 19:54:52 <HOST> scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number:
Nov 26 19:54:52 <HOST> scsi: [ID 107833 kern.notice] Sense Key: Aborted Command
Nov 26 19:54:52 <HOST> scsi: [ID 107833 kern.notice] ASC: 0x0 (no additional sense info), ASCQ: 0x0, FRU: 0x0
Nov 26 19:54:53 <HOST> ahci: [ID 296163 kern.warning] WARNING: ahci0:
No actual problem is caused by this error message.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Cause |
Solution |
References |