Infiniband Switch showunhealthy Message "Flash disk has bad blocks"
(Doc ID 2009033.1)
Last updated on SEPTEMBER 27, 2022
Applies to:
Exadata Database Machine X2-2 Hardware - Version All Versions and laterSun Datacenter InfiniBand Switch 36 - Version All Versions and later
Sun Network QDR InfiniBand Gateway Switch - Version All Versions and later
Information in this document applies to any platform.
Symptoms
show unhealthy command gives the following:
#showunhealthy
WARNING Flash disk has bad blocks <<<<<<
FAILURE - 1 sensors NOT OK
env_test output also shows problems with internal disk:
#env_test
(Snipe..)
Starting SSD test:
WARNING Flash disk has bad blocks <<<<<
SSD test returned 1 faults
Environment test FAILED
And, ILOM snapshot shows:
< @usr@local@bin@spshexec_show_faulty.out>
-> show faulty
Target | Property | Value
--------------------+------------------------+---------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB
/SP/faultmgmt/0/ | class | fault.chassis.io.disk.predictive <<<<<<<
faults/0 | | -failure <<<<<<<
/SP/faultmgmt/0/ | sunw-msg-id | DCSIB-8000-3Y
faults/0 | |
/SP/faultmgmt/0/ | uuid | <UUID>
faults/0 | | 0437
/SP/faultmgmt/0/ | timestamp | 2015-04-21/13:26:27
faults/0 | |
/SP/faultmgmt/0/ | fru_part_number | 5111232
faults/0 | |
/SP/faultmgmt/0/ | fru_serial_number | <SERIAL_NUMBER>
faults/0 | |
/SP/faultmgmt/0/ | product_serial_number | <SERIAL_NUMBER>
faults/0 | |
/SP/faultmgmt/0/ | chassis_serial_number | <SERIAL_NUMBER>
faults/0 | |
Changes
The message is showing for the first time.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |