BDA Nodes Inaccessible Via the Client Data Network Due to the EOIB Interface not Re-linking and Joing BONDETH0 after the IB Link is Down then Up
(Doc ID 2025628.1)
Last updated on OCTOBER 13, 2023
Applies to:
Big Data Appliance X3-2 Hardware - Version All Versions and laterBig Data Appliance X5-2 Hardware - Version All Versions and later
Big Data Appliance Hardware - Version All Versions and later
Big Data Appliance X4-2 Hardware - Version All Versions and later
Linux x86-64
Symptoms
The EoIB VNIC interfaces (eth8 & eth9) do not automatically re-link and re-join the bondeth0 client network interface when the InfiniBand (IB) link comes up, after an outage of that IB VNIC. The IB interfaces and bondib0 do come back up. This can result in an outage if an IB port or gateway leaf switch goes down as the bondeth0 is not fully intact. Therefore if the second gateway leaf switch goes down at a later time, the bondeth0 will be down and the BDA nodes inaccessible via the client data network.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Cause |
| Solution |
| For BDA V4.2 |
| For BDA V4.1 and earlier releases |
| References |