9x40 and T10000A/B/C/D - Permanent Write Errors
(Doc ID 2091274.1)
Last updated on MARCH 03, 2023
Applies to:
Sun StorageTek 9940 Tape Drive - Version Not Applicable to Not Applicable [Release N/A]Sun StorageTek 9840 Tape Drive - Version Not Applicable to Not Applicable [Release N/A]
Sun StorageTek T10000 Tape Drive - Version All Versions to All Versions [Release All Releases]
Sun StorageTek T10000A Tape Drive - Version All Versions to All Versions [Release All Releases]
Sun StorageTek T10000B Tape Drive - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
Write perm errors. These are sometimes called Write Data Checks. For Fibre Channel tape drives they will create sense key = x3 (sense byte 2) , ASC = 0C (sense byte 12), ASCQ = 00 (sense byte 13)type sense data. They can be associated with application error messages that indicate a write permanent error has occurred. For FICON drives a write perm error is typically associated with error message IOS000I with WDC listed as the cause. (Write Data Check)
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |