Crash Dump Fails When Dump Device is Set to Fujitsu Eternus JX40 disk connected to 12Gbps SAS Card .
(Doc ID 2128919.1)
Last updated on OCTOBER 05, 2022
Applies to:
Solaris Operating System - Version 11.3 and laterInformation in this document applies to any platform.
Symptoms
Crash dump fails when the dump device is set to Fujitsu File Unit JX40 connected to LSI SAS3008 controller (12Gbps SAS card)
=========================
# reboot -d
Oct 29 15:14:28 host reboot: initiated by root on /dev/console
updating /platform/sun4v/boot_archive
panic[cpu94]/thread=c401a7df6cc0: forced crash dump initiated at user request
000002a10dcef0f0 genunix:kadmin+650 (fc, 0, c40140149e38, 4, 5, 1)
%l0-3: 0000000020895800 00000000102bc400 0000000000000004 0000000000000004
%l4-7: 0000000000000600 0000000000000010 0000000000000004 0000000000000004
000002a10dcef1c0 genunix:uadmin+1d0 (1, c401a257edb0, 0, 6d7000, ff00, 5)
%l0-3: 0000000000007324 00000300000be200 0000000000000004 0000000000000000
%l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
syncing file systems... done
Deferred dump not available.
dumping to /dev/dsk/c6t5000CCA03002C069d0s6, offset 65536, content: kernel sections: zfs
0:00 0% done (zfs)
0% done: 0 (kernel) + 0 (zfs) pages dumped, dump failed: error 5
rebooting...
Resetting...
=========================
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Changes |
Cause |
Solution |
References |