SL150 - Library Went Inoperative With RC = 9104 (Doc ID 2196013.1)

Last updated on NOVEMBER 28, 2022

Applies to:

Symptoms

FSC 9104

===>> SL150 got inoperative with RC = 9104

#define LIBMD_ROBOT_REACH_MOVE_ERROR_FAULT_CODE 9104 //_supported_
faultCode=9104
faultString="ROBOT_REACH_MOVE_ERROR"
helpString="Check for unseated tape. Inspect/replace robot"
cru1="Robot"
cru1Priority=1

===>> Several messages with RC = 5134
 warn 2.0.4.0.1 5134 "Performed put retry. Put retry total = 1. Address for this retry (P:MSRC) 2:2,L,1,4"
 warn 2.0.4.0.1 5134 "Performed put retry. Put retry total = 2. Address for this retry (P:MSRC) 2:2,L,1,4"
 warn 2.0.4.0.1 5134 "Performed put retry. Put retry total = 3. Address for this retry (P:MSRC) 2:2,L,1,4"
 error 2.0.4.0.1 5134 "Director - putResponse() srv_coord_put: hit something during reach extend. Might have hit the front of the cell or the cell may be occupied.; End of Text" <<<=== SLOT FULL

===>> Medias getting LOAD Failure during mount:

====>>> C00039L6
 error 0.0.0.0.0 3318 "(request id = HOST/0x8d0e8c0) IfmMove::commonMoveCommand(): LOAD DRIVE: (P:MR) 2:2,Bottom Drive with tape C00039L6 request failed:" <<<=== Drive Modulo 2 Bottom
 error 0.0.0.0.0 3318 "(request id = HOST/0x8d0e8c0) IfmMove::commonMoveCommand(): LOAD DRIVE: (P:MR) 2:2,Bottom Drive with tape C00039L6 request failed:"
 warn 0.0.0.0.0 5804 "MciHdwEnv::readEnv: mciCmd.issueCommand() Failed or Timed Out completionCode=5 "
 info 0.0.0.0.0 0000 "Service Beacon is DEACTIVATED: Current Health Event indicates the Library is degraded"

 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive() for drive id 9: MEDIA ERROR"
 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive(): AFTER dc.issueCommand():Drive LOAD failed for drive id 9 (userState==2)."
 error 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::commonMoveCommand(): LOAD DRIVE: (P:MR) 2:5,Top Drive with tape C00039L6 request failed:" <<<=== Drive Modulo 5 Top
 info 0.0.0.0.0 3318 "(request id = UNKNOWN/0) IfmMove::unloadDrive(): (P:MR) 2:5,Top Drive, tape: C00039L6 MEDIA ERROR"

====>>> C00040L6
 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive(): AFTER dc.issueCommand():Drive LOAD failed for drive id 3 (userState==2)."
 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive() for drive id 3: MEDIA ERROR"
 error 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::commonMoveCommand(): LOAD DRIVE: (P:MR) 2:2,Top Drive with tape C00040L6 request failed:" <<<=== Drive Modulo 2 Top
 info 0.0.0.0.0 3318 "(request id = UNKNOWN/0) IfmMove::unloadDrive(): (P:MR) 2:2,Top Drive, tape: C00040L6 MEDIA ERROR"

 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive() for drive id 4: MEDIA ERROR"
 info 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::loadDrive(): AFTER dc.issueCommand():Drive LOAD failed for drive id 4 (userState==2)."
 error 0.0.0.0.0 3318 "(request id = HOST/0x868a8d8) IfmMove::commonMoveCommand(): LOAD DRIVE: (P:MR) 2:2,Bottom Drive with tape C00040L6 request failed:" <<<=== Drive Modulo 2 Bottom

Changes

Entered new cartridges in SL150.

Cause

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.