My Oracle Support Banner

T10000 - SLConsole Shows Drive Not Powered (Doc ID 2294989.1)

Last updated on JULY 15, 2019

Applies to:

Sun StorageTek T10000 Tape Drive - Version All Versions and later
Information in this document applies to any platform.


This problem affects both SL8500 and SL3000. If the drive is powered off using the CLI command the following symptoms will be observed:

SLC shows the T10000 tray with a "Drive Not Powered" status.

If the drive is power cycled then the power led on the back of the tray will blink green and the drive will not power up.

If the drive is manually powered off using CLI commands it will look like this if you issue the CLI drive print command:

SL8500> drive print 1,4,2,1,3


requestId 130401

Attributes Device 1,4,2,1,3
Device State Not Powered

Drive Status not Communicating

Drive Type T10000c

Firmware Version 3.63.101-5.50

Interface Type Fibre

In Use false

Ip Address N/A

Serial Number 576004000575

State offline

Status warn

Tray Serial Number 531000102094

Tray Status ok

Vendor StorageTek

Wwn 50:01:04:f0:00:xx.xx:xx

Object Drive 1,4,2,1,3


Failure Count 0

Success Count 1






To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.