SBC Stuck In Boot Loop Due To Faulty Hard Drive
(Doc ID 2347286.1)
Last updated on NOVEMBER 20, 2023
Applies to:
Acme Packet 4500 - Version S-Cx6.2.0 to S-Cz7.4.0 [Release S-Cx6.0 to S-Cz7.0]Acme Packet 3820 - Version S-Cx6.2.0 to S-Cz7.4.0 [Release S-Cx6.0 to S-Cz7.0]
Information in this document applies to any platform.
Symptoms
An SBC with a hard drive is stuck in a boot loop with the following messages displayed on the console:
[3]FAT-fs (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 1783ndled error code
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 17837)
end_request: I/O error, dev sda, sector 781 read failed (blocknr 17837)
end_request: I/O error, dev sda, sector 781428932
FAT-fs (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sdas (sda2): FAT read failed (blocknr 9944)
end_request: I/O error, dev sda, sector 781436825
FAT-fs (sda2): FAT read failed (blocknr 17837)
end_request: I/O er25
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |