Eagle R46.5 problem with rtrv-card command output when specifying parameter type loc
(Doc ID 2351830.1)
Last updated on MAY 03, 2024
Applies to:
Oracle Communications EAGLE (Hardware) - Version EAGLE 46.5 to EAGLE 46.5 [Release EAGLE 46.0]Oracle Communications EAGLE (Software) - Version EAGLE 46.5 to EAGLE 46.5 [Release EAGLE 46.0]
Information in this document applies to any platform.
Goal
Execute rtrv-card with parameter as card location results in "invalid hardware configuration for a specific card"
> rtrv-card:loc=1211
oraclestp 18-01-22 12:16:27 EEST EAGLE 46.5.0.0.1-70.39.1
rtrv-card:loc=1211
Command entered at terminal #19.
;
E2144 Cmd Rej: Location invalid for hardware configuration
However when executing "rtrv-card" command the particular card is showing in the list as valid and configured.
> rtrv-card
oraclestp 18-01-22 12:18:57 EEST EAGLE 46.5.0.0.1-70.39.1
rtrv-card
Command entered at terminal #1.
;
Command Accepted - Processing
oraclestp 18-01-22 12:18:57 EEST EAGLE 46.5.0.0.1-70.39.1
CARD TYPE APPL DATA LSET NAME LINK SLC LSET NAME LINK SLC
1101 DSM VSCCP
1113 E5-MCAP OAM
1114 TDM-A
1115 E5-MCAP OAM
1116 TDM-B
1117 MDAL
1201 DSM VSCCP
1204 IPSM IPS
1211 ENET IPSG
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Goal |
| Solution |