My Oracle Support Banner

Adding or replacing an Oracle Quad 10 Gb/Dual 40 Gb Ethernet Adapter on SuperCluster M7 or M8 (Doc ID 2382998.1)

Last updated on JUNE 11, 2020

Applies to:

Oracle SuperCluster M8 Hardware
Oracle SuperCluster M7 Hardware
Oracle Solaris on SPARC (64-bit)

Purpose

This document describes the procedure that should be used when adding or replacing an Oracle Quad 10 Gb/Dual 40 Gb Ethernet Adapter on SuperCluster M7 or M8.

Scope

This procedure only applies to an Oracle Quad 10 Gb/Dual 40 Gb Ethernet Adapter on SuperCluster M7 or M8. Refer to product specific documentation for non-SuperCluster systems.

Note that SuperCluster M7 does not ship with Oracle Quad 10 Gb/Dual 40 Gb Ethernet Adapter as standard and an engineering hardware exception must be obtained before retro-fitting Oracle Quad 10 Gb/Dual 40 Gb Ethernet Adapter on SuperCluster M7.

Details

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Purpose
Scope
Details
 1. Preparation
 2. Adapter Replacement
 3. Adapter Configuration
 4. Connect cables and reboot
 5. Verification

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.