Format-disk Command Failure Message On Standby TDM; When Formatting Standby RMD
(Doc ID 2384657.1)
Last updated on NOVEMBER 03, 2023
Applies to:
Oracle Communications EAGLE (Software) - Version EAGLE 46.5 and laterTekelec
During post-upgrade procedures, if two Removable Media Drives are formatted; the standby RMD will output "Format-disk of system removable media complete"; followed by "Command failed: could not release standby fixed disk". However, the command actually completes successfully, as seen with the output of the command "rept-stat-db". See system logs below: (for Standby MASP/RMD loc=1115)
rept-stat-db
Command entered at terminal #13.
;
tekelecstp 18-02-07 16:21:09 MST EAGLE 46.5.0.0.1-70.39.1
DATABASE STATUS: >> OK <<
TDM 1114 ( ACTV ) TDM 1116 ( STDBY)
C LEVEL TIME LAST BACKUP C LEVEL TIME LAST BACKUP
- -------- ---------------------- - -------- ----------------------
FD BKUP Y 8 18-02-07 15:59:15 MST Y 8 18-02-07 15:59:15 MST
FD CRNT Y 8 Y 8
GTT DB 1 1
MCAP 1113 MCAP 1115
- -------- - --------
RD BKUP - - - - N 1 - -
USB BKP - - - - - - - -
;
> format-disk:type=system:force=yes:loc=1115
Command Accepted - Processing
tekelecstp 18-02-07 16:21:43 MST EAGLE 46.5.0.0.1-70.39.1
format-disk:type=system:force=yes:loc=1115
Command entered at terminal #13.
;
tekelecstp 18-02-07 16:21:44 MST EAGLE 46.5.0.0.1-70.39.1
Format-disk of system removable media started.
Extended processing required, please wait.
;
tekelecstp 18-02-07 16:21:44 MST EAGLE 46.5.0.0.1-70.39.1
Disk Operation: Creating file system.
;
tekelecstp 18-02-07 16:22:20 MST EAGLE 46.5.0.0.1-70.39.1
Disk Operation: Initializing Disk Contents.
;
tekelecstp 18-02-07 16:22:43 MST EAGLE 46.5.0.0.1-70.39.1
0016.1083 SYSTEM INFO REPT COND: system alive
Report Date:18-02-07 Time:16:22:43
;
tekelecstp 18-02-07 16:26:44 MST EAGLE 46.5.0.0.1-70.39.1
Format disk in progress
;
tekelecstp 18-02-07 16:27:43 MST EAGLE 46.5.0.0.1-70.39.1
0018.1083 SYSTEM INFO REPT COND: system alive
Report Date:18-02-07 Time:16:27:43
;
tekelecstp 18-02-07 16:28:24 MST EAGLE 46.5.0.0.1-70.39.1
Format-disk of system removable media complete.
;
tekelecstp 18-02-07 16:28:24 MST EAGLE 46.5.0.0.1-70.39.1
Command failed: could not release standby fixed disk.
;
tekelecstp 18-02-07 16:28:24 MST EAGLE 46.5.0.0.1-70.39.1
> rept-stat-db
Command Accepted - Processing
tekelecstp 18-02-07 16:29:02 MST EAGLE 46.5.0.0.1-70.39.1
rept-stat-db
Command entered at terminal #13.
;
tekelecstp 18-02-07 16:29:02 MST EAGLE 46.5.0.0.1-70.39.1
DATABASE STATUS: >> OK <<
TDM 1114 ( ACTV ) TDM 1116 ( STDBY)
C LEVEL TIME LAST BACKUP C LEVEL TIME LAST BACKUP
- -------- ---------------------- - -------- ----------------------
FD BKUP Y 8 18-02-07 15:59:15 MST Y 8 18-02-07 15:59:15 MST
FD CRNT Y 8 Y 8
GTT DB 1 1
MCAP 1113 MCAP 1115
- -------- - --------
RD BKUP - - - - N 1 - -
USB BKP - - - - - - - -
;
Goal
To inform users that the "format-disk" command does complete. The "Command failed" message is a false, informational type message; since the update of the system USB/RMD actually completes normally.
Reference the Upgrade Doc used:
Software Upgrade Guide Releases 45.x and 46.x E54340 Revision 4
See Upgrade Session 2; Procedure 12: Upgrading Removable media. Steps 16 - 22
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Goal |
Solution |