My Oracle Support Banner

Diameter Signaling Router (DSR): How to set Power Regulator Setting on HP ProLiant BL460 servers to HP Static High Performance Mode (Doc ID 2406605.1)

Last updated on NOVEMBER 09, 2020

Applies to:

Oracle Communications Diameter Signaling Router (DSR) - Version DSR 7.0 and later
Information in this document applies to any platform.


For HP ProLiant bl460 blade servers in c7000 enclosures, the Power Regulator setting can be viewed in the iLO4 browser interface under Power Management / Power Settings / Power Regulator Settings.  At the time of original installation, the BIOS menu is entered via console during the boot cycle and the HP Power Profile is set to 'Maximum Performance.'  This Profile will set the Power Regulator Setting seen in iLO4 to 'HP Static High Performance Mode.'  If the Power Regulator Setting is set to any other value when viewed in iLO4, it will need to be corrected.

Note that this setting can be changed through the iLO4 browser interface, but it will simultaneously affect the HP Power Profile setting in BIOS (unseen, unable to change via iLO4 GUI) to 'Custom' and is not recommended. 


To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.