Sun V440 - ALOM NET mgmt port does not work
(Doc ID 2407537.1)
Last updated on OCTOBER 26, 2019
Applies to:
Sun Fire V440 Server - Version All Versions to All Versions [Release All Releases]Information in this document applies to any platform.
Symptoms
It is not possible to establish remote connections to ALOM via NET mgmt port.
The ALOM is connected to the local network through a switch.
The network cable has been replaced and moved to other switch ports, however the problem has persisted.
The activity light of NET mgmt has never lit up. As result, any remote connection didn't work.
Some ALOM information can be gathered from Solaris via rscadm command. On the machine we were working on, the configuration was ok.
a. network configuration:
::::::::::::::
scadm-shownetwork.out
::::::::::::::
IP Address: 192.168.x.xx
Gateway address: 192.168.x.1
Netmask: 255.255.255.0
Ethernet address: <MAC_ADDRESS>
b. The ALOM network parameters were ok:
::::::::::::::
scadm-show.out
::::::::::::::
if_network="true"
....
if_connection="ssh"
....
netsc_dhcp="false"
netsc_ipaddr="192.168.x.xx"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="192.168.x.1"
No problems were observed on connections from SER mgmt (serial management port).
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |