Oracle X7-2 ILOM Has Detected That A PCIe Link Layer Is Inactive (SPX86A-8009-3J)
(Doc ID 2411407.1)
Last updated on FEBRUARY 01, 2024
Applies to:
Oracle Server X7-2 - Version All Versions to All Versions [Release All Releases]Information in this document applies to any platform.
Symptoms
Note:
The 'fwupdate' command in the example below is a part of the Oracle Hardware Management Package, which may need to be installed separately.
It is beyond the scope of the MOS note to explain how to install OHMP. If needed, there is a How to Install" link in the reference section below.
Also note if the X7-2 node is part of an engineered system or part of a sun cluster, the system software policy may not allow for OHMP to be installed manually.
On Oracle Server X7-2, the SP reports an SPX86A-8009-3J ILOM fault and the internal 25Gb NIC ports are not showing up on the host.
These three components will be identified as faulty:
/SYS/MB/NET1
/SYS/MB/P0
/SYS/MB
However the node will power on.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |