My Oracle Support Banner

How To Activate EAGLE HIPR2 HIGH RATE MODE Control Feature (Doc ID 2455942.1)

Last updated on SEPTEMBER 29, 2023

Applies to:

Oracle Communications EAGLE (Software) - Version EAGLE 46.2 to EAGLE 46.5 [Release EAGLE 46.0]
As of Release 46.4 and higher , EAGLE no longer supports the 1GB IMT (Inter Module Transport) cable. Customers are required to install 2.5GB cables and HIPR2 cards prior to upgrading to EAGLE 46.4/46.5. If the HIPR2-High-Rate-Mode feature (partnum=893020101) is not activated, then steps must be followed to ensure that the cables have been properly installed and operation of IMT buses at 2.5Gbps is verified. See "Cabling" in Hardware Reference and "Activating the HIPR2 High Rate Mode Feature" in Database Administration -System Management for more information. This activity needs to be performed during a maintenance window. If the EAGLE is currently running release 46.2, or lower release, then instruction on page can be followed to obtain the FAK for "HIPR2 High Rate Mode" (partnum=893020101) feature.

It is required for customer to acquire the FEATURE ACCESS KEY (FAK) for HIPR2 HIGH RATE MODE feature activation for SW Releases 46.2.x and earlier.

The Feature Access Key is not required for HIGH RATE MODE Feature activation for SW Releases 46.3.x and higher.

Reference: Online EAGLE DATABASE ADMINISTRATION - SYSTEM MANAGEMENT USER'S GUIDE, Page 693, Section A-53, for EAGLE Release 46.5


Provide the Procedures and Steps to Activate the required EAGLE HIPR2 HIGH RATE MODE Control Feature on STP's running SW Release 46.4 and above


To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.